06:15, 20 Наймдугаар сар 2015 дээрх Almas

2015-08-20T06:15:05Z

Almas: Шинэ хуудас:

Task: Display Current Routing Table Using ip command

By using the ip command, you can setup and view static route. For example, to display current routing table you…

2015-08-20T06:13:45Z

Шинэ хуудас: <h2>Task: Display Current Routing Table Using ip command</h2><p>By using the ip command, you can setup and view static route. For example, to display current routing table you…

Шинэ хуудас

<h2>Task: Display Current Routing Table Using ip command</h2><p>By using the ip command, you can setup and view static route. For example, to display current routing table you can type command:<br> <code># ip route show</code><br> Sample output:</p><pre>192.168.2.0/24 dev eth1 proto kernel scope link src 192.168.2.1
192.168.1.0/24 dev eth0 proto kernel scope link src 192.168.1.2
default via 192.168.1.254 dev eth0</pre><p>You can add static route using following command:<br> <strong>ip route add {NETWORK} via {IP} dev {DEVICE}</strong><br> For example network 192.168.55.0/24 available via 192.168.1.254:<br> <code># ip route add 192.168.55.0/24 via 192.168.1.254 dev eth1</code><br> Alternatively, you can use old good route command:<br> <code># route add -net 192.168.55.0 netmask 255.255.255.0 gw 192.168.1.254 dev eth1</code></p><h2>Linux Persistence Routes</h2><p>The drawback of 'ip' or 'route' command is that, when Linux reboots it will forget static routes. So store them in configuration file. Static routing describes a system that does not implement adaptive routing. In these systems routes through a data network are described by fixed paths (statically). These routes are usually entered into the router by the system administrator</p><p><a name="rhelf"></a><br></p><h3><span style="color: rgb(255, 0, 0);">Red Hat (RHEL) / CentOS / Fedora Linux</span> Persistence Static Routing</h3><p>You need to open /etc/sysconfig/network-scripts/route-eth0 file to define static routes for eth0 interface:<br> <code># cat /etc/sysconfig/network-scripts/route-eth0</code><br> Sample Output:</p><pre>GATEWAY0=192.168.1.254
NETMASK0=255.255.255.0
ADDRESS0=192.168.55.0
GATEWAY1=10.164.234.112
NETMASK1= 255.255.255.240
ADDRESS1=10.164.234.132</pre><h4>How do I define static routing for network 10.0.0.0/8 via 10.9.38.65 router?</h4><p>Open /etc/sysconfig/network-scripts/route-eth0:<br> <code># vi /etc/sysconfig/network-scripts/route-eth0</code><br> Append following line:<br> <code>10.0.0.0/8 via 10.9.38.65</code><br> Save and close the file. Restart networking:<br> <code># service network restart</code><br> Verify new routing table:<br> <code># route -n</code><br> <a name="deb"></a><br></p><h3><span style="color: rgb(0, 153, 0);">Debian / Ubuntu Linux</span> Persistence Static Routing</h3><p>Open configuration file /etc/network/interfaces<br> <code># cat /etc/network/interfaces</code>

[[Ангилал:Linux]]
[[Ангилал:Сисадмин]]

@@ 8-р мөр: / 8-р мөр: @@
 ADDRESS1=10.164.234.132</pre><h4>How do I define static routing for network 10.0.0.0/8 via 10.9.38.65 router?</h4><p>Open /etc/sysconfig/network-scripts/route-eth0:<br> <code># vi /etc/sysconfig/network-scripts/route-eth0</code><br> Append following line:<br> <code>10.0.0.0/8 via 10.9.38.65</code><br> Save and close the file. Restart networking:<br> <code># service network restart</code><br> Verify new routing table:<br> <code># route -n</code><br> <a name="deb"></a><br></p><h3><span style="color: rgb(0, 153, 0);">Debian / Ubuntu Linux</span> Persistence Static Routing</h3><p>Open configuration file /etc/network/interfaces<br> <code># cat /etc/network/interfaces</code>
+Output:</p><pre>auto eth0
 [[Ангилал:Linux]]
 [[Ангилал:Сисадмин]]

Static route тохируулах - Түүх

06:15, 20 Наймдугаар сар 2015 дээрх Almas

Almas: Шинэ хуудас:

Task: Display Current Routing Table Using ip command